Skip to main content

System Hardware Test Engineer at Calligo Technologies

Hello Dear Readers,

Currently, at Calligo Technologies vacancy for a System Hardware Test Engineer role.

Calligo has been focused on developing Products and Solutions that are oriented toward HPC, AI, and big data solutions for multiple industry segments. As part of the VLSI design team, you will have the opportunity to work in testing next-generation SoCs and to see the designs powering the HPC, AI & Big Data solution domains.

Roles and Responsibility:

  • Digital circuit design, Microcontroller / processor based design.
  • Schematic design
  • Board bring-up & testing
  • Technical Knowledge and Skill
  • Familiarity with digital/processor-based design, Power supply design, EMI/EMC Theory
  • Board bring up, prototype testing, product/system testing, troubleshooting and debugging of digital/Microcontroller/Microprocessor based designs
  • JTAG based testing, open OCD based debugging
  • Proficiency in EDA tools (Kicad, OrCAD, etc)
  • Adequate knowledge to read schematics and datasheets of components
  • Good understanding of Key Peripherals: USB, Ethernet, DDR, PCle, CAN, SPI, I2C, UART, I2S, RS232, GPIO and I/0 Interface
  • Familiarization with electronic test and measurement equipment, DMM, DSO, LA, JTAG debuggers etc.
  • Must have strong problem-solving and analytical skills
  • Knowledge of 32 bit microcontroller/microprocessor architecture. Preferably RISC V
  • FPGA design skills with familiarity with Vivado will be added advantage
  • Ability to solder/desolder for minor corrections during debug is a must
  • Experience handling ESD sensitive hardware
  • Good written and verbal communication skills
  • A good team player
  • Taking ownership
  • Self-motivated and self-starter
  • A mission-oriented mindset and a desire to never stop learning.

Minimum Qualification:

Diploma, B.Sc. in Electrical, Electronics  


Comments

Post a Comment

Popular posts from this blog

Design Engineer at Infineon Bangalore

  Hello Dear Readers, Currently at Infineon Bangalore vacancy for the Design Engineer role. Design analog and mixed-signal modules in CMOS and Smart PowerTechnologies, with a particular focus on achieving high-efficiency power conversion for applications using GaN devices; In your new role you will: Design analog and mixed-signal modules  in CMOS and Smart PowerTechnologies, with a particular focus on achieving high-efficiency power conversion for applications using GaN devices; Design and verify pre-silicon analog/mixed-signal integrated circuit blocks, including incorporating features for testing and quality assurance, and providing support for top-level integration; Assist in defining the requirements  for analog and mixed-signal blocks,aligning them with IP Module architecture, and ensuring compliance with requirements through documentation; Estimate effort and planning design work packages to meet project milestones; Provide essential support to physical design ...
1 comment
Read more

Tutorial on EasyEDA desktop software for PCB and schematic design

In this article, I am going to write a tutorial on how to use EasyEDA desktop application for creating a schematic and for PCB design. One of best advantage of this software is that you can create design offline and can automatically synchronize your design with your online EasyEDA account.  It can be used for circuits simulation, PCB deign and electronics circuits design. You can download EasyEDA desktop application by clicking on following link and it will work on windows 7 or its greater version. They are also releasing soon offline application OSX and Linux users. So keep visiting their website for more information.                                                    https://easyeda.com/page/download So let’s start and see how to design a schematic and PCB using EasyEDA offline desktop application. So first of all lets see how to create a schema...
84 comments
Read more

Engineer II - Analog Design Engineering at Microchip

Hello Dear Readers,   Currently at Microchip  vacancy for Engineer II - Analog Design Engineering role. Job Description: The Mixed Signal Development Group is responsible for delivering analog, digital and mixed-signal IP to divisions within Microchip. We work with leading edge CMOS processes to produce analog integrated circuits for wireline applications. From 112Gb/s+ SERDES to high-speed FEC engines, we enable technology that allows Microchip’s products to interface to the outside world.  Job Descriptions: As a member of the Mixed-Signal Development Group, the candidate will be supervised by a team leader/manager, and be engaged in the design of SERDES/DSP blocks, and other high-speed Digital Signal Processing blocks. This will involve taking a design from initial concept to production form. Throughout you will be mentored and coached by experienced engineers and be exposed to Microchip's Best-In-Class engineering practices. Job Responsibilities: Ramping up o...
2 comments
Read more